Kenwood NX-5700/5800

The NX-5000 Series supports 2 digital CAIs — P25 (Phases 1 & 2) and NXDN™ – plus FM analog in a single radio. Unsurpassed interoperability is in your hands.

General Features

Main Features

  • Multi-Digital operation in P25 (Phase 1 & 2) and NXDN™ protocols
  • Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
  • Large, Color 2.55″ (154 x 422 pixels) TFT Display for at-a-glance operational status checking
  • Easy to follow GUI and Multi-line Text to convey more information
  • Dual Remote Control Head Option and Multi-Band (Multi RF Deck) Control Option providing scalable configurations for various operations and applications
  • Built-in GPS Receiver for effective fleet management
  • Bluetooth® Module built-in for hands-free operation
  • Active Noise Reduction (ANR) utilizing built-in DSP for suppression of ambient noise
  • Renowned KENWOOD Digital Audio Quality
  • Built-in 56-bit DES Encryption
  • Optional 256-bit AES Encryption
  • microSD / microSDHC Memory Card Slot for increased memory capacity for “Voice & Data”

General Features

  • Frequency Range
    • VHF: 136-174 MHz (NX-5700 / 5700B)
    • UHF: 380-470 MHz, 450-520 MHz, (NX-5800 / 5800B)
  • RF Output
    • VHF: 5-50 W (NX-5700 / 5700B)
    • UHF: UHF: 5-45 W (NX-5800 / 5800B)
  • Maximum of 4,000 CH / Radio capacity, 512 CH / Zone, 128 Zones
  • 6 Front PF keys & 4 Up / Down Selectors
  • Emergency / AUX Key
  • 4 W Speaker Audio
  • Dual remote control Head Option and Multi-Band (Multi RF Deck) Control Ready
  • Dash & Remote Mount
  • DB-25 Accessory Connector
  • MIL-Spec Standard Mic
  • MIL-Spec 12-Key DTMF Mic Option Available
  • MIL-STD-810 C / D / E / F / G
  • MIL-STD “Driven-Rain”
  • IP54 / 55 Water & Dust Intrusion (IP54:RF Deck IP55: Remote Control Head)

Digital Features

Digital Features

P25 MODE

  • P25 Conventional / Trunked
    (Phase 1 / Phase 2) Protocol
  • AMBE+2™ Enhanced Vocoder
  • Talk Group ID Lists
  • Individual ID Lists
  • Caller ID Display
  • Remote Monitor / Remote Check
  • Radio Inhibit
  • Encryption Key Zeroize & Retention
  • P25 GPS Location
  • P25 Over-the-Air Re-keying
  • P25 Over-the-Air Programming*2

NXDN™ MODE

  • NXDN™ Conventional / Trunked Protocol*1
  • AMBE+2™ Enhanced Vocoder
  • 6.25 & 12.5 kHz Channel Spacing
  • Over-the-Air Alias
  • Over-the-Air Programming*2
  • Paging Call
  • Emergency Call
  • All Group Call
  • Status Messaging*3
  • Remote Stun / Kill*3
  • Remote Check*3
  • Short & Long Data Messages*3
  • GPS Location
  • NXDN™ Digital Scrambler Included

*1: Only supports TYPE-C Protocol
*2: Requires KENWOOD OTAP Management software.
*3: Requires NX subscriber unit PC serial interface compatible software application (e.g. KENWOOD AVL & Dispatch Messaging software) or hardware (e.g. console)

Analog Features

ANALOG Features

FM MODE

  • Conventional & LTR® Zones
  • FleetSync® / II : PTT ID ANI / Caller ID Display, Selective / Group Call, Emergency Status / Text Messages
  • MDC-1200 : PTT ID ANI / Caller ID Display, Emergency, Radio Check / Inhibit
  • QT / DQT & Two-Tone
  • Built-in Voice Inversion Scrambler

NXDN™ is a registered trademark of JVCKENWOOD Corporation and Icom Inc.
LTR® is a registered trademark of E.F. Johnson Company.
AMBE+2™ is a trademark of Digital Voice Systems Inc.
Bluetooth® is a registered trademark of Bluetooth SIG,Inc.
SD and microSD are trademarks of SD-3C, LLC in the United States, and/or other countries.

Tags: , , , , , ,

Your Name (required)

Your Email (required)

Subject

Your Message