Outdoor DMR repeater.

RD962 is a digital / analog portable repeater that is compatible with the DMR standard. This device is compact for easy transport and can be embedded with an optional mini duplexer. It supports a range of power supply options to guarantee uninterrupted communications during emergencies. Its API and 100 Mbps network port combine to support an extended array of applications. The device provides IP67 protection, making it reliable in harsh operating environments.


Slim and Portable
With its compact design, the RD962 measures only 1 3/5th inches and weighs less than 6.62 lbs. The device can also have an optional embedded mini duplexer inside.
External Battery
With an optional external large-capacity battery, the device delivers an extended battery life to guarantee uninterrupted communications.
Emergency Power Port
The port allows for power connection in emergencies.
IP67 Protection
Compatible with the IP67 standard for water and dust protection, the device can operate properly when wet and dirty (tested in 1 meter of water for 30 minutes).
Reliable and Durable
Compatible with the American military standard MIL-STD-810 C/D/E/F/G and HALT verified, the device can perform excellently in harsh operating environments.
User-friendly Panel
The operating panel provides a wide range of status indicators, a button for channel adjustment, and a port for palm microphone or remote speaker microphone.
Smart Battery (optional)
A 10Ah smart Li-Ion battery can support at least eight hours of work when working at 50% duty cycle and high TX power. Compatible with the smbus1.1 standard, RD962 can monitor battery conditions such as estimated remaining capacity, used capacity percentage, and usage record. The device can also maximize the battery life through smart charge management, it can automatically recharge the battery for use anytime. Powered by three levels of battery protection, the device considerably enhances charging safety and reliably.
Repeater Diagnostics and Control
Through a PC-based application, the system administrator can remotely diagnose and control (connected to the Internet via an IP port) and local repeaters (via a USB port). Hytera’s RDAC software supports network access at multiple points and allows the administrator to monitor networked two-way radios.
Voice Input/output via Dual Time Slots
In digital mode, the device supports voice input and output via dual time slots and enables calls continuous call recording.
Digital / Analog  Smart Switching
Back to back interconnection of digital & analog network can be achieved by wired or wireless IP, ensuring a smooth analog-to-digital transition and smart switching between networks.
By connecting geographically distributed repeaters that run at the same or different frequencies to form an IP-based and location- independent wireless communication network, IP-based repeater interconnection allows mobile radios to obtain voice and data services while roaming.
16 Channels
This product supports up to 16 channels. You can switch between channels using PC based RDAC software, the channel selector knob on the front panel, or the external interface on the repeater.
Digital- Analog Interconnection
This feature enables two-way radios with digital and analog radio fleets, and digital and analog users to intercommunicate in different operating modes to guarantee users’ seamless transition from analog to digital capabilities.
The GPS module supports GPS data transmission and enables emergency command centers to monitor the location of a small mobile network in real time.


General data
Frequency range
VHF: 136 – 174MHz
UHF1: 400 – 470MHz ; UHF3: 350 – 400MHz
Channel capacity
Channel spacing
12.5 / 20 / 25 kHz
Operating voltage
13.6 ± 15% VDC
Storage battery: 14.8 V
Current Drain (Standby)
≤ 0.8 A
Current Drain (Transmit)
≤ 3.5 A
10Ah (Li-Ion)
Battery service life
(5-5-90 duty cycle, high transmitting power)
approx. 8 hours
Frequency stability
±0.5 ppm
Antenna impedance
50 Ω
Duty Cycle 100%
Dimensions (H × W × D)
11.85 x 7.24 x 2 inches(repeater with protective shell)
11.45 x 6.77 x 1.62 inches(repeater without protective shell)
400-470MHz: YAMRD96XU1
Industry Canada ID 138-174MHz: 8913A-RD962VHF
406.1-470MHz: 8913A-RD962U1
Transmitting power
1 – 10 W (adjustable)
11K0F3E at 12.5 kHz
14K0F3E at 20 kHz
16K0F3E at 25 kHz
4FSK digital modulation
12.5 kHz (data only): 7K60FXD
12.5 kHz (data and voice): 7K60FXW
Conducted/Radiated Emission
-36 dBm < 1 GHz
-30 dBm > 1 GHz
Modulation limiting
±2.5 kHz at 12.5 kHz
±4.0 kHz at 20 kHz
±5.0 kHz at 25 kHz
FM Hum & Noise
40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Adjacent channel Power
60 dB at 12,5 kHz
70 dB at 20/25 kHz
Audio  Response
+1 dB to -3 dB
Audio distortion
≤ 3 %
Audio Response +1 ~ -3dB
Digital vocoder type
Digital Protocol ETSI-TS102 361-1, 2&3
Sensitivity (analog)
0.3 μV (12 dB SINAD)
0.22 μV (typical) (12 dB SINAD)
0.4 μV (20 dB SINAD)
Sensitivity (digital)
0.3 μV / BER 5%
65 dB at 12.5 kHz / 75 dB at 20 and 25 kHz
60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
75 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz
75 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz
40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Rated audio distortion
≤ 3 %
Audio response
+1 dB to -3 dB
Conducted spurious emission
< -57 dBm
Environmental Specs
Operating temperature range
-30 °C to +60 °C
Storage temperature range
-40 °C to +85 °C
IEC 61000-4-2 (level 4)
± 8 kV (contact discharge)
± 15 kV (air discharge)
Protection against dust and moisture
Shock and vibration resistance
Relative humidity
Time to first fix (TTFF) cold start
< 1 minute
Time to first fix (TTFF) warm start
< 10 seconds
Horizontal accuracy
< 10 meters
All technical indications were tested according to the corresponding standards. Subject to change on the basis of continuous development.
Tags: , ,

Your Name (required)

Your Email (required)


Your Message