Hytera TC-610P

Hytera TC-610P

HYT TC-610P with pin-touched connection interface are IP66-excellent dust-tight and protected against powerful water jets .

Categories: , Tag:


HYT TC-610P with pin-touched connection interface are IP66-excellent dust-tight and protected against powerful water jets . Harsh, noisy, dusty and wet working conditions in mega-project and construction sites may lower your efficiency and productivity by smudging the radio or shadowing the talk.


·High/Low Power Switchable

By simple pressing one button, users can switch to low power when communicating within limited range coverage or switch to high power when further distance is required. High transmit power optimizes range coverage while low transmit power conserves battery consumption, all at the user’s control.

·Programmable 12.5kHz/25kHz Channel Spacing

The feature enables flexibility and easy migration of channel spacing requirements when the need arises, with no need to buy new radios.


Allows users to monitor the activity on the current channel. The feature is especially helpful for receiving a weak signal.

·Battery Save

The Battery Save feature is automatically activated once no activity on the channel and no operation performed, for extended operation time.

·Low Battery Alert

Alert users to recharge the battery should the battery level run low.

·TX Admit

Prevent users from “ talking over” each other by restricting the user from transmitting if activity is detected on the channel.

·Time-out Timer

The feature allows for more efficient use of channels by limiting the amount of time of each transmission.

·PC Programmable

You are able to customize the features of each radio for each user.

·Wired Clone

Easily copy the features of one radio to another.


Set up workgroups/users with unique CDCSS/CTCSS to prevent unwanted conversations on the same frequency.

·Selectable Squelch Level (1-9)

Helps minimize interference from undesired weak signals and helps weak signals be heard.

·Channel Scan

The channel scan feature enables the radio to continuously scan each channel in the scan list for activity. Simply press a side function button to activate scanning. When activity is detected on a channel the scan process will stop and you will hear the transmission.

·Voice Operated Transmit (VOX)

Enjoy the convenience of hands-free operation when used with optional accessories.

·2-Tone Decode (for TC-610P optional)

Allows you to receive Select Call, Alert Call, and Alert Call w/Voice.

·HDC1200 PTT ID (for TC-610P optional )

Enables the transmission of caller ID and allows user to identify incoming callers.


ATIS is an automatic identification device compliant with special technology regulations. This feature may be enabled by your dealer for specific areas.

·DOS (Data Operated Squelch)

Helps to eliminate noise that occurred at the receiver.